Mobil

Mobil SHC Gargoyle 32 previously Mobil SHC Gargoyle 32

Refrigeration compressor oils

Application Mobil SHC Gargoyle 32

Application considerations: Mobil SHC Gargoyle 32 oils are hygroscopic and measures must be taken to prevent the absorption of moisture. Packages should be tightly sealed when not in use and small packages are preferred. The product should not be placed in a plastic container if this can absorb moisture. Mobil SHC Gargoyle 32 oils are recommended for refrigeration systems where refrigerants containing HFC or carbon dioxide are used. Typical applications are: Domestic refrigeration such as refrigerators, freezers, air conditioners and heat pumps. Commercial refrigeration systems such as air conditioners in offices, shopping centres and hotels and in mobile refrigeration systems. Industrial applications such as food preparation and freezing and refrigeration applications.

Synthetic industrial gear oil 150 (ISO VG)

Mobil SHC Gear 150 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 150 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 150 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 150 drops automatically with higher volumes.

Synthetic industrial gear oil 460 (ISO VG)

Mobil SHC Gear 460 exceptional performance, synthetic industrial gear oil is designed to provide optimum equipment protection and oil life even under extreme conditions.

Most important applications Mobil SHC Gear 460 are:

• + Modern, highly loaded gearboxes
• + Plastic extruder gearboxes

It is especially formulated to resist micropitting of modern, case hardened gearing and can operate in both high and low temperature environments.

Mobil SHC Gear 460 gear oils are highly recommended for closed industrial gear drives such as helical, angle and steel on steel gears.

Pay attention! Price of Mobil SHC Gear 460 drops automatically with higher volumes.

Mobil EAL Arctic 22C

Refrigeration compressor oils

Application Mobil EAL Arctic 22C

Application considerations: Mobil EAL Arctic Series oils are hygroscopic and measures must be taken to prevent the absorption of moisture. Packages should be tightly sealed when not in use and small packages are preferred. The product should not be placed in a plastic container if this can absorb moisture. Mobil EAL Arctic Series oils are recommended for refrigeration systems where refrigerants containing HFC or carbon dioxide are used. Typical applications are: Domestic refrigeration such as refrigerators, freezers, air conditioners and heat pumps. Commercial refrigeration systems such as air conditioners in offices, shopping centres and hotels and in mobile refrigeration systems. Industrial applications such as food preparation and freezing and refrigeration applications.

Mobil Grease XHP 461

Grease

Application Mobil Grease XHP 461

Mobilgrease XHP 460 greases are used in a wide range of equipment including industrial, automotive, construction and marine applications. The blue color of Mobilgrease XHP 461 and 462 enables easy verification of application. With its high, ISO VG 460 base oil viscosity, these greases are recommended for high load applications at slow-to-moderate speeds, including most bearing applications in the paper, construction, and mining industries, as well as off-highway vehicles. Specific applications: Mobilgrease XHP 461 is recommended by ExxonMobil for use in industrial and marine applications, chassis components and farm equipment. It provides excellent low temperature performance. It is satisfactory for low speed flexible gear-type couplings. Mobilgrease XHP 462 Series is recommended for use in felt roll bearings, wet end bearings, and press section bearings. It is also a good multi-purpose grease for general mill applications and industrial and marine applications, chassis components and farm equipment. Mobilgrease XHP 462 Moly is fortified with 3% molybdenum disulfide and is particularly recommended by ExxonMobil for applications such as bucket pins and fifth wheels, where molybdenum disulphide provides an extra level of protection where sliding friction and oscillating motion can lead to rupturing of the oil film, resulting in metal to metal contact.

Product Description Mobilgard™ 412

Mobilgard™ 12 Series by ExxonMobil are high performance diesel engine oils developed for use in trunk piston engines operating on low sulphur distillate fuels in marine and industrial applications. They are formulated to have excellent resistance to oxidation and viscosity increase

Product Description Mobilgard™ 412

Mobil MOBILTHERM 603

Heat transfer Oils

Applications Mobil MOBILTHERM 603

Mobiltherm heat transfer oils are high performance products intended for use in closed indirect heating installations. They are recommended for use in cold-oil sealed, indirect heating and cooling systems in all kinds of industrial processes.

Mobiltherm heat transfer oils are formulated from highly refined base stocks that are resistant to thermal cracking and chemical oxidation. They are very thermally stable and are capable of an extremely long service life without deposit formation or viscosity increase.

Mobiltherm heat transfer oils have good heat transfer efficiency and their viscosities are such that they can be pumped readily at both start-up and operating temperatures. They demonstrate specific heat and thermal conductivities that provide more rapid heat dissipation. The flash points of these oils will not decrease significantly in service because of their resistance to thermal cracking at the operating temperatures for which they are recommended.

Mobil Delvac 1350

Heavy Duty Diesel Engine Oils

Application Mobil Delvac 1350

Naturally aspirated and turbo-charged diesel powered equipment. On highway light and heavy duty trucking. Off highway industries including: construction, mining, quarrying, and agriculture

Mobil Fluid 428 previously Mobilfluid 426

Extra High Performance Multipurpose Tractor Fluid

Application Mobil Fluid 428

Recommended by ExxonMobil for use in:  Heavy-duty transmissions, differentials, final drives, hydraulic systems, power steering systems, wet brakes, PTOs and hydrostatic drives. Recommended in off-highway industries including: agriculture, construction, and quarrying.Recommended for top-up and refill of systems. Do not use in passenger car automatic transmissions. Recommended by ExxonMobil for use in applications requiring API GL-4 grade lubricants in all gear applications except hypoid gear designs. Potential replacement for engine oils recommended for hydraulic and transmission systems

Mobil DTE 732

Premium Turbine Oils

Application Mobil DTE 732

Mobil DTE 700 Series are designed to meet or exceed the requirements of circulation systems of steam and gas turbines. Specific applications include Electric power generation for high output base load utilities. Gas Turbine Combined Cycle Power Plants operating in base load or peak generation modes. Gas turbines in Captive Power plants. Gas or steam turbine prime movers. Hydroelectric turbine applications

Mobil Vacuoline 525

Circulating Oils

Application Mobil Vacuoline 525

These oils are intended primarily for the lubrication of plain bearings, roller bearings, parallel shaft and bevel gearing. They are suitable as multipurpose lubricants in systems not subject to shock loading and which do not require extreme pressure performance. The Mobil Vacuoline 500 series possess good demulsibility that is retained under conditions of severe water contamination. Mobil Vacuoline 500 series are used in applications using splash, bath and ring oil arrangements and all other application methods involving pumps, valves and auxiliary equipment. They are recommended for use in hydraulic systems where higher viscosity oils are specified. They are particularly resistant to the effects of prolonged high temperature exposure and perform well in circulating systems with short oil residence times. Typical applications include: No Twist Rod Mills. Moderate duty spur, bevel, helical and herringbone gear units. Circulating systems. Mobil Vacuoline 525, 528, 533 can also be used in hydraulic systems employing gear, vane, radial and axial piston pumps where high viscosity anti-wear hydraulic fluids are required. Certain compressors and vacuum pumps handling air and inert gases provided the discharge temperatures do not exceed 150oC , not suitable for breathing air compressors

Mobil Vacuoline 137

Circulating Oils

Application Mobil Vacuoline 137

Mobil Vacuoline 100 Series oils are primarily recommended and used almost exclusively for rolling mill applications. The oils are suitable for: Back-up roll bearings of rolling mills, particularly bearing systems, where either a single or dual tank is employed. Other full fluid bearing systems and similar type applications in other industries, particularly where the bearings are subjected to heavy water contamination

Mobil Vacuoline 146

Circulating Oils

Application Mobil Vacuoline 146

Mobil Vacuoline 100 Series oils are primarily recommended and used almost exclusively for rolling mill applications. The oils are suitable for: Back-up roll bearings of rolling mills, particularly bearing systems, where either a single or dual tank is employed. Other full fluid bearing systems and similar type applications in other industries, particularly where the bearings are subjected to heavy water contamination

Mobil Vacuoline 148

Circulating Oils

Application Mobil Vacuoline 148

Mobil Vacuoline 100 Series oils are primarily recommended and used almost exclusively for rolling mill applications. The oils are suitable for: Back-up roll bearings of rolling mills, particularly bearing systems, where either a single or dual tank is employed. Other full fluid bearing systems and similar type applications in other industries, particularly where the bearings are subjected to heavy water contamination

Mobil Vacuoline 546

Circulating Oils

Application Mobil Vacuoline 546

These oils are intended primarily for the lubrication of plain bearings, roller bearings, parallel shaft and bevel gearing. They are suitable as multipurpose lubricants in systems not subject to shock loading and which do not require extreme pressure performance. The Mobil Vacuoline 500 series possess good demulsibility that is retained under conditions of severe water contamination. Mobil Vacuoline 500 series are used in applications using splash, bath and ring oil arrangements and all other application methods involving pumps, valves and auxiliary equipment. They are recommended for use in hydraulic systems where higher viscosity oils are specified. They are particularly resistant to the effects of prolonged high temperature exposure and perform well in circulating systems with short oil residence times. Typical applications include: No Twist Rod Mills. Moderate duty spur, bevel, helical and herringbone gear units. Circulating systems. Mobil Vacuoline 525, 528, 533 can also be used in hydraulic systems employing gear, vane, radial and axial piston pumps where high viscosity anti-wear hydraulic fluids are required. Certain compressors and vacuum pumps handling air and inert gases provided the discharge temperatures do not exceed 150oC , not suitable for breathing air compressors

Mobil Pegasus 805

Gas Engine Oil

Made for stationairy Gas Engines / CHP Combined Heat and Power

Most important applications of Mobil Pegasus 805 are:

• Caterpillar, Superior, Waukesha and other turbocharged, naturally aspirated, medium to high speed four-cycle engines requiring a low ash oil
• Engines experiencing valve face and seat wear
• Lean-burn and stoichiometric four-cycle engines
• Engines equipped with catalytic converters
• Applications using alternate fuels containing low levels of sulfur or chlorine
• In field gathering operations where sour gas (low levels of H2S) is used as fuel
  
  

Your advantage: Price of Mobil Pegasus 805 drops automatically with higher volumes.

Mobil DTE 846

Superior Performance Turbine Oils

Application Mobil DTE 846

Mobil DTE 832 and 846 are superior performance turbine oils designed for use in steam and gas turbine oil systems, direct- or gear-coupled and turbine speed control mechanisms. Specific applications include: Combined cycle (CCGT) electric power generation applications including those with a common circulation system for the steam turbine and gas turbine. Lubrication of steam turbine or gas turbine units used for electric power generation, natural gas pipeline transmission, process operations and cogeneration plants.

Mobil DTE 10 Excel™ 22

Mobil Industrial Premium Quality Hydraulic Oils

Most important applications of Mobil DTE 10 Excel™ 22 are:

• + Industrial and mobile equipment hydraulic systems operating at high pressures and temperatures in critical applications
• + Hydraulic systems subject to deposit build-up such as sophisticated Computer Numerically Controlled (CNC) machines, particularly where close clearance servo-valves are used
• + Systems where cold start-up and high operating temperatures are typical
• + Systems requiring a high degree of load-carrying capability and anti-wear protection
• + Machines employing a wide range of components using various metallurgy

Pay attention! Price of Mobil DTE 10 Excel™ 22 drops automatically with higher volumes.

Mobil DTE PM 150

Paper Machine Lubricants

Application Mobil DTE PM 150

Lubrication of industrial paper machine circulating systems. Application involving circulation systems operating over a wide temperature range. Systems that must be started and brought on line quickly. Circulation systems' lubricating gears and bearings